Pavel Hutař, Ph.D.

Publications that are part of the Web of Science database, possibly also other publications chosen by authors.

2019

• Vojtek, T; Pokorny, P; Kubena, I; Nahlik, L; Fajkos, R; Hutar, P, 2019: Quantitative dependence of oxide-induced crack closure on air humidity for railway axle steel. INTERNATIONAL JOURNAL OF FATIGUE 123, p. 213 - 224, doi: 10.1016/j.ijfatigue.2019.02.019
• Tinoco, HA; Holzer, J; Pikalek, T; Buchta, Z; Lazar, J; Chlupova, A; Kruml, T; Hutar, P, 2019: Determination of elastic parameters of Si3N4 thin films by means of a numerical approach and bulge tests. THIN SOLID FILMS 672, p. 66 - 74, doi: 10.1016/j.tsf.2018.12.039
• Oplt, T; Sebik, M; Berto, F; Nahlik, L; Pokorny, P; Hutar, P, 2019: Strategy of plasticity induced crack closure numerical evaluation. THEORETICAL AND APPLIED FRACTURE MECHANICS 102, p. 59 - 69, doi: 10.1016/j.tafmec.2019.04.004

2018

• Nahlik, L; Stegnerova, K; Hutar, P, 2018: Estimation of critical applied stress for crack initiation from a sharp V-notch. THEORETICAL AND APPLIED FRACTURE MECHANICS 93, p. 247 - 262, doi: 10.1016/j.tafmec.2017.09.002

2017

• Hutar, P; Poduska, J; Smid, M; Kubena, I; Chlupova, A; Nahlik, L; Polak, J; Kruml, T, 2017: Short fatigue crack behaviour under low cycle fatigue regime. INTERNATIONAL JOURNAL OF FATIGUE 103, p. 207 - 215, doi: 10.1016/j.ijfatigue.2017.06.002
• Pokorny, P; Vojtek, T; Nahlik, L; Hutar, P, 2017: Crack closure in near-threshold fatigue crack propagation in railway axle steel EA4T. ENGINEERING FRACTURE MECHANICS 185, p. 2 - 19, doi: 10.1016/j.engfracmech.2017.02.013
• Nahlik, L; Pokorny, P; Sevcik, M; Fajkos, R; Matusek, P; Hutar, P, 2017: Fatigue lifetime estimation of railway axles. ENGINEERING FAILURE ANALYSIS 73, p. 139 - 157, doi: 10.1016/j.engfailanal.2016.12.014

2016

• Nahlik, L; Stegnerova, K; Masa, B; Hutar, P, 2016: A failure scenario of ceramic laminates with strong interfaces. ENGINEERING FRACTURE MECHANICS 167, p. 56 - 67, doi: 10.1016/j.engfracmech.2016.04.022
• Majer, Z; Hutar, P; Frank, A; Sevcik, M; Zouhar, M; Pinter, G; Nahlik, L, 2016: Point load effect on the buried polyolefin pipes lifetime. POLYMER ENGINEERING AND SCIENCE 56(1), p. 79 - 86, doi: 10.1002/pen.24194
• Smid, M; Hornik, V; Hutar, P; Hrbacek, K; Kunz, L, 2016: High Cycle Fatigue Damage Mechanisms of MAR-M 247 Superalloy at High Temperatures. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS 69(2), p. 393 - 397, doi: 10.1007/s12666-015-0817-0
• Smid, M; Hutar, P; Hornik, V; Hrbacek, K; Kunz, L, 2016: Stage I fatigue cracking in MAR-M 247 superalloy at elevated temperatures. 21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) 2, p. 3018 - 3025, doi: 10.1016/j.prostr.2016.06.378
• Pokorny, P; Nahlik, L; Hutar, P, 2016: Influence of variable stress ratio during train operation on residual fatigue lifetime of railway axles. 21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) 2, p. 3585 - 3592, doi: 10.1016/j.prostr.2016.06.447
• Hutar, P; Poduska, J; Chlupova, A; Smid, M; Kruml, T; Nahlik, L, 2016: Description of short fatigue crack propagation under low cycle fatigue regime. 21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) 2, p. 3010 - 3017, doi: 10.1016/j.prostr.2016.06.377
• Poduska, J; Hutar, P; Kucera, J; Frank, A; Sadilek, J; Pinter, G; Nahlik, L, 2016: Residual stress in polyethylene pipes. POLYMER TESTING 54, p. 288 - 295, doi: 10.1016/j.polymertesting.2016.07.017
• Pokorny, P; Hutar, P; Nahlik, L, 2016: Residual fatigue lifetime estimation of railway axles for various loading spectra. THEORETICAL AND APPLIED FRACTURE MECHANICS 82, p. 25 - 32, doi: 10.1016/j.tafmec.2015.06.007

2014

• Poduska, J; Kucera, J; Hutar, P; Sevcik, M; Krivanek, J; Sadilek, J; Nahlik, L, 2014: Residual stress distribution in extruded polypropylene pipes. POLYMER TESTING 40, p. 88 - 98, doi: 10.1016/j.polymertesting.2014.08.006
• Majer, Z; Marcian, P; Nahlik, L; Hutar, P; Knesl, Z, 2014: Particulate Composite Damage: Numerical Estimation of Micro-Crack Propagation Direction. MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE VII 592-593, p. 445 - 448, doi: 10.4028/www.scientific.net/KEM.592-593.445
• Masa, B; Nahlik, L; Hutar, P, 2014: Estimation of Apparent Fracture Toughness of Alumina Based Ceramic Laminate. MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE VII 592-593, p. 405 - 408, doi: 10.4028/www.scientific.net/KEM.592-593.405
• Nahlik, L; Pokorny, P; Hutar, P; Matusek, P, 2014: Fatigue crack propagation in steels for railway axles. MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE VII 592-593, p. 254 - 257, doi: 10.4028/www.scientific.net/KEM.592-593.254
• Nahlik, L; Stegnerova, K; Hutar, P; Majer, Z, 2014: Critical value for crack propagation from sharp V-notch. MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE VII 592-593, p. 177 - 180, doi: 10.4028/www.scientific.net/KEM.592-593.177
• Majer, Z; Zouhar, M; Sevcik, M; Nahlik, L; Hutar, P, 2014: Pressure pipe damage: Numerical estimation of point load effect II. ADVANCES IN FRACTURE AND DAMAGE MECHANICS XII 577-578, p. 533 - 536, doi: 10.4028/www.scientific.net/KEM.577-578.533
• Nahlik, L; Pokorny, P; Hutar, P, 2014: Influence of crack retardation on fatigue crack propagation in steels for railway axles. 11TH INTERNATIONAL FATIGUE CONGRESS, PTS 1 AND 2 891-892, p. 351 - 356, doi: 10.4028/www.scientific.net/AMR.891-892.351
• Hutar, P; Sevcik, M; Nahlik, L; Zouhar, M; Knesl, Z, 2014: Assessment of the Stability of a Surface Crack in Laminates. MECHANICS OF COMPOSITE MATERIALS 50(1), p. 9 - 16, doi: 10.1007/s11029-014-9388-0
• Hutar, P; Kubena, I; Sevcik, M; Smid, M; Kruml, T; Nahlik, L, 2014: Small fatigue crack propagation in Y2O3 strengthened steels. JOURNAL OF NUCLEAR MATERIALS 452(42064), p. 370 - 377, doi: 10.1016/j.jnucmat.2014.05.071

2013

• Masa, B; Nahlik, L; Hutar, P, 2013: Particulate Composite Materials: Numerical Modeling of a Cross-Linked Polymer Reinforced With Alumina-Based Particles. MECHANICS OF COMPOSITE MATERIALS 49(4), p. 421 - 428, doi: 10.1007/s11029-013-9358-y
• Majer, Z; Hutar, P; Nahlik, L, 2013: Determination of the Effect of Interphase on the Fracture Toughness and Stiffness of a Particulate Polymer Composite. MECHANICS OF COMPOSITE MATERIALS 49(5), p. 475 - 482, doi: 10.1007/s11029-013-9364-0
• Lach, R; Hutar, P; Vesely, P; Nezbedova, E; Knesl, Z; Koch, T; Bierogel, C; Grellmann, W, 2013: Assessment with indentation techniques of the local mechanical behavior of joints in polymer parts. POLIMERY 58(42349), p. 900 - 905
• Nezbedova, E; Hutar, P; Zouhar, M; Knesl, Z; Sadilek, J; Nahlik, L, 2013: The applicability of the Pennsylvania Notch Test for a new generation of PE pipe grades. POLYMER TESTING 32(1), p. 106 - 114, doi: 10.1016/j.polymertesting.2012.09.009
• Sevcik, M; Hutar, P; Nahlik, L; Seitl, S, 2013: The effect of constraint level on a crack path. ENGINEERING FAILURE ANALYSIS 29, p. 83 - 92, doi: 10.1016/j.engfailanal.2012.11.011
• Hutar, P; Zouhar, M; Nahlik, L; Sevcik, M; Masa, B, 2013: Multilayer polymer pipes failure assessment based on a fracture mechanics approach. ENGINEERING FAILURE ANALYSIS 33, p. 151 - 162, doi: 10.1016/j.engfailanal.2013.04.022
• Hutar, P; Sevcik, M; Frank, A; Nahlik, L; Kucera, J; Pinter, G, 2013: The effect of residual stress on polymer pipe lifetime. ENGINEERING FRACTURE MECHANICS 108, p. 98 - 108, doi: 10.1016/j.engfracmech.2013.04.014
• Masa, B; Nahlik, L; Hutar, P, 2013: Numerical Modelling of Particulate Composite with a Hyperelastic Matrix. ADVANCES IN FRACTURE AND DAMAGE MECHANICS XI 525-526, p. 25 - 28, doi: 10.4028/www.scientific.net/KEM.525-526.25

2012

• Sevcik, M; Hutar, P; Zouhar, M; Nahlik, L, 2012: Numerical estimation of the fatigue crack front shape for a specimen with finite thickness. INTERNATIONAL JOURNAL OF FATIGUE 39, p. 75 - 80, doi: 10.1016/j.ijfatigue.2011.03.010
• Majer, Z; Nahlik, L; Hutar, P, 2012: The Estimation of Micro-crack Behavior in Polymer Particulate Composite with Soft Interphase. ADVANCED COMPOSITE MATERIALS, PTS 1-3 482-484, p. 1660 - 1663, doi: 10.4028/www.scientific.net/AMR.482-484.1660
• Nahlik, L; Hutar, P; Duskova, M; Dusek, K; Masa, B, 2012: ESTIMATION OF THE MACROSCOPIC STRESS-STRAIN CURVE OF A PARTICULATE COMPOSITE WITH A CROSS-LINKED POLYMER MATRIX. MECHANICS OF COMPOSITE MATERIALS 47(6), p. 627 - 634
• Sevcik, M; Hutar, P; Knesl, Z; Nahlik, L; Zouhar, M, 2012: Estimation of the critical configuration of a crack arrested at the interface between two materials. COMPUTATIONAL MATERIALS SCIENCE 64, p. 225 - 228, doi: 10.1016/j.commatsci.2012.04.049

2011

• Zouhar, M; Hutar, P; Nahlik, L; Knesl, Z, 2011: EFFECT OF TIME-DEPENDENT MATERIAL PROPERTIES ON THE CRACK BEHAVIOR IN THE INTERFACE OF TWO POLYMERIC MATERIALS. MECHANICS OF COMPOSITE MATERIALS 47(2), p. 203 - 210
• Sevcik, M; Hutar, P; Nahlik, L, 2011: CRACK BEHAVIOR IN A WELDED POLYOLEFIN PIPE. MECHANICS OF COMPOSITE MATERIALS 47(3), p. 263 - 270
• Hutar, P; Sevcik, M; Nahlik, L; Pinter, G; Frank, A; Mitev, I, 2011: A numerical methodology for lifetime estimation of HDPE pressure pipes. ENGINEERING FRACTURE MECHANICS 78(17), p. 3049 - 3058, doi: 10.1016/j.engfracmech.2011.09.001
• Kruml, T; Hutar, P; Nahlik, L; Seitl, S; Polak, J, 2011: Fatigue cracks in Eurofer 97 steel: Part II. Comparison of small and long fatigue crack growth. JOURNAL OF NUCLEAR MATERIALS 412(1), p. 7 - 12, doi: 10.1016/j.jnucmat.2011.01.018

• K1-Center in Polymer Engineering and Science (PCCL-K1), Academy of Sciences of the Czech Republic - Grants of distinctly investigative character focused on the sphere of research pursued at present particularly in the Academy of Sciences of the Czech Rep., 2017 - 2020
• Innovative approach to improve fatigue performance of automotive components aiming at CO2 emissions reduction (INNOFAT) (RFCS-02-2016 -747266), European Commission, H2020, 2017 - 2020
• Research and development of precision casting technology for new type of aircraft engine castings and axial turbocharger wheels (CZ.01.1.02/0.0/0.0/15_019/0004399), Ministry of Industry and Trade - Cooperation, 2020 - 2020
• Research and development of advanced precision casting technology of strongly thermally affected parts of new turbochargers from nickel based superalloys (CZ.01.1.02/0.0/0.0/15_019/0002421), Ministry of Industry and Trade - Cooperation, 2017 - 2019
• Research and Development of Precision Casting Technology of Radial Wheels of New Generation Turbochargers and New Types of Gas Turbines Blades (TA 04011525), Technology Agency of the Czech Rep. - ALFA, 2014 - 2017
• Multidisciplinary team in materials design and its involvement into international cooperation (CZ.1.07./2.3.00/20.0197), MEYS - OP Education for Competiteveness, 2012 - 2015
• Human resources development in the research of physical and material properties of emerging, newly developed and applied engineering materials (CZ.1.07/2.3.00/20.0214), MEYS - OP Education for Competiteveness, 2012 - 2015
• Talented postdocs for scientific excellence in physics of materials (CZ.1.07/2.3.00/30.0063), MEYS - OP Education for Competiteveness, 2012 - 2015
• Effects of cores and boundaries of nanograins on structural and physical properties of ball milled and mechanically alloyed iron-based materials (GAP108/11/1350), Czech Science Foundation - Standard Grants, 2011 - 2014
• Description of the slow crack growth in polymer materials under complex loading conditions (P108/12/1560), Czech Science Foundation - Standard Grants, 2012 - 2014
• Research4Industry - Budování a rozvoj vědecko-výzkumné spolupráce s výzkumnými a průmyslovými partnery (CZ.1.07/2.4.00/17.0006), Ministerstvo školství, mládeže a tělovýchovy ČR, 2011 - 2014
• Microstructure of Fe-Al based alloys (7AMB12SK009), MEYS - Mobility, 2012 - 2013
• Mesoscopic framework for modeling physical processes in multiphase materials with defects (247705), FP7- People - Marie Curie actions - IRG, 2009 - 2013
• Assessment of fatigue damage of thin-walled structures (101/09/0867), Czech Science Foundation - Standard Grants, 2009 - 2011
• Fracture damage mechanism of multilayer polymer body (106/09/0279), Czech Science Foundation - Standard Grants, 2009 - 2011
• Correlation between structural changes, damage evolution and crack propagation behaviour of welded thermoplastics components (101/09/J027), Czech Science Foundation - Standard Grants, 2009 - 2011
• The effect of free surface on fatigue crack growth (106/06/P239), Czech Science Foundation - Standard Grants, 2006 - 2008