Lenka Klakurková, Ph.D.

Publications that are part of the Web of Science database, possibly also other publications chosen by authors.

2020

• Slamecka, K; Jech, D; Klakurkova, L; Tkachenko, S; Remesova, M; Gejdos, P; Celko, L, 2020: Thermal cycling damage in pre-oxidized plasma-sprayed MCrAlY plus YSZ thermal barrier coatings: Phenomenon of multiple parallel delamination of the TGO layer. SURFACE & COATINGS TECHNOLOGY 384, doi: 10.1016/j.surfcoat.2019.125328

2019

• Palousek, D; Kocica, M; Pantelejev, L; Klakurkova, L; Celko, L; Koutny, D; Kaiser, J, 2019: SLM process parameters development of Cu-alloy Cu7.2Ni1.8Si1Cr. RAPID PROTOTYPING JOURNAL 25(2), p. 266 - 276, doi: 10.1108/RPJ-06-2017-0116
• Horynova, M; Remesova, M; Klakurkova, L; Dvorak, K; Rocnakova, I; Yan, SK; Celko, L; Song, GL, 2019: Design of tailored biodegradable implants: The effect of voltage on electrodeposited calcium phosphate coatings on pure magnesium. JOURNAL OF THE AMERICAN CERAMIC SOCIETY 102(1), p. 123 - 135, doi: 10.1111/jace.15888

2018

• Mouralova, K; Kovar, J; Klakurkova, L; Blazik, P; Kalivoda, M; Kousal, P, 2018: Analysis of surface and subsurface layers after WEDM for Ti-6Al-4V with heat treatment. MEASUREMENT 116, doi: 10.1016/j.measurement.2017.11.053
• Mouralova, K; Kovar, J; Klakurkova, L; Prokes, T, 2018: Effect of Width of Kerf on Machining Accuracy and Subsurface Layer After WEDM. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE 27(4), p. 1908 - 1916, doi: 10.1007/s11665-018-3239-4
  (LYRA)
• Tkachenko, S; Dvorak, K; Jech, D; Slamecka, K; Klakurkova, L; Palousek, D; Celko, L, 2018: Wear of grinding rotors with thermally-sprayed coatings in a high-speed mill. WEAR 412-413, p. 49 - 59, doi: 10.1016/j.wear.2018.05.016
  (LYRA, RIGAKU3)
• Mouralova, K; Klakurkova, L; Matousek, R; Prokes, T; Hrdy, R; Kana, V, 2018: Influence of the cut direction through the semi-finished product on the occurrence of cracks for X210Cr12 steel using WEDM. ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING 18(4), p. 1318 - 1331, doi: 10.1016/j.acme.2018.04.004
  (LYRA)
• Mouralova, K; Kovar, J; Klakurkova, L; Bednar, J; Benes, L; Zahradnicek, R, 2018: Analysis of surface morphology and topography of pure aluminium machined using WEDM. MEASUREMENT 114, p. 169 - 176, doi: 10.1016/j.measurement.2017.09.040

2017

• Remeseova, M; Klakurkova, L; Horynova, M; Celko, L; Kaiser, J, 2017: Preparation of Metallographic Samples with Anodizing Layers. Metallography. MATERIALS SCIENCE FORUM , doi: 10.4028/www.scientific.net/MSF.891.106
• Pavlouskova, Z; Horynova, M; Klakurkova, l; Julis, M; Gejdos, P; Remesova, M, 2017: Influence of microstructure on machinability of material and its final surface quality. SOLID STATE PHENOMENA , doi: 10.4028/www.scientific.net/SSP.270.112
• Klakurkova, L; Horynova, M; Julis, M; Gejdos, P, 2017: The Use of Microstructural Analysis for the Evaluation of Quality of Double-Wall Tubes. MATERIALS SCIENCE FORUM , doi: 10.4028/www.scientific.net/MSF.891.269
• Svejcar, J; Klakurkova, L; Skala, Z, 2017: Analysis of the Causes of Boiler Explosion. MATERIALS SCIENCE FORUM , doi: 10.4028/www.scientific.net/MSF.891.263
• Gejdos, P; Klakurkova, L; Julis, M; Horynova, M; Remesova, M; Hegr, E, 2017: Analysis of Surface Layer Defects on Carburized Steel Component after Alkaline Blackening. MATERIALS SCIENCE FORUM , doi: 10.4028/www.scientific.net/MSF.891.274
• Jech, D; Celko, L; Huzlik, R; Bulin, T; Klakurkova, L; Svejcar, J; Kaiser, J, 2017: Enhancement of Magnetic Properties of 41CrMo4 Steel by Means of Diffusion Coatings. MATERIALS SCIENCE FORUM , doi: 10.4028/www.scientific.net/MSF.891.560
• Horynova, M; Klakurkova, L; Julis, M; Gejdos, P; Celko, L, 2017: Influence of Microstructural Parameters on the Corrosion Resistance of 7075 Aluminum Alloy. MATERIALS SCIENCE FORUM , doi: 10.4028/www.scientific.net/MSF.891.303
• Casas-Luna, M; Tkachenko, S; Horynova, M; Klakurkova, L; Gejdos, P; Diaz-de-la-Torre, S; Celko, L; Kaiser, J; Montufar, EB, 2017: Interpenetrated Magnesium-Tricalcium Phosphate Composite: Manufacture, Characterization and In Vitro Degradation Test. ACTA METALLURGICA SINICA-ENGLISH LETTERS 30(4), p. 319 - 325, doi: 10.1007/s40195-017-0560-0
  (LYRA, RIGAKU3)
• Mouralova, K; Kovar, J; Klakurkova, L; Prokes, T; Horynova, M, 2017: Comparison of morphology and topography of surfaces of WEDM machined structural materials. MEASUREMENT 104, p. 12 - 20, doi: 10.1016/j.measurement.2017.03.009
  (LYRA)
• Klakurkova, L.; Horynova, M.; Julis, M.; Gejdos, P.; Skalka, P.; Remesova, M.; Celko, L., 2017: Failure analysis of massively failed compressed air cartridge. ENGINEERING FAILURE ANALYSIS 82, p. 776 - 782, doi: 10.1016/j.engfailanal.2017.07.016
• Pavlouskova, Z; Klakurkova, L; Julis, M; Celko, L; Svejcar, J, 2017: Use of Metallographic Methods for Determining the Cause of Change of Magnetic Properties of Austenitic Steels. MATERIALS SCIENCE FORUM , doi: 10.4028/www.scientific.net/MSF.891.219
• Remesova, M; Klakurkova, L; Horynova, M; Celko, L; Kaiser, J, 2017: Preparation of Metallographic Samples with Anodic Layers. MATERIALS SCIENCE FORUM , doi: 10.4028/www.scientific.net/MSF.891.106
• Remesova, M; Klakurkova, L; Celko, L; Sladkova, L; Jech, D; Kaiser, J, 2017: Anodizing of Zinc-Titanium Alloy in NaOH and KOH Baths. SOLID STATE PHENOMENA , doi: 10.4028/www.scientific.net/SSP.258.399
• Celko, L; Jech, D; Dvorak, K; Rocnakova, I; Montufar-Jimenez, E. B; Slamecka, K; Klakurkova, L, 2017: Powder Processing and Thermal Spraying of Barium-Magnesium-Aluminium-Silicate Environmental Barrier Coatings. MATERIALS SCIENCE FORUM , doi: 10.4028/www.scientific.net/MSF.891.569
• Casas Luna, M.; Montúfar, E. B.; Horynová, M.; Gejdoš, P.; Klakurková, L.; Díaz de la Torre, S.; Kaiser, J.; Čelko, L., 2017: Tricalcium Phosphate - Magnesium Interface: Microstructure and Properties. SOLID STATE PHENOMENA 258, p. 412 - 415, doi: 10.4028/www.scientific.net/SSP.258.412
  (LYRA, RIGAKU3, micro-CT-L240)
• Horynova, M; Casas Luna, M; Montufar, E. D; Torre, S. D; Celko, L; Klakurkova, L; Dieguez Trejo, G; Dvorak, K; Zikmund, T; Kaiser, J, 2017: Fracture Mechanism of Interpenetrating Iron-Tricalcium Phosphate Composite. SOLID STATE PHENOMENA , doi: 10.4028/www.scientific.net/SSP.258.333
• Svejcar, J; Klakurkova, L; Julis, M; Gejdos, P; Remesova, M; Palenikova, L, 2017: Analysis of causes of fractures of terminal board bolts. SOLID STATE PHENOMENA , doi: 10.4028/www.scientific.net/SSP.270.93
• Remesova, M; Klakurkova, L; Rocnakova, I; Celko, L; Palenikova, L; Kaiser, J, 2017: Application of Metallographic Analysis Techniques for Detection and Identification of Spray Paint Defects. SOLID STATE PHENOMENA , doi: 10.4028/www.scientific.net/SSP.270.118
• Klakurkova, L; Horynova, M; Julis, M; Gejdos, P; Palenikova, L; Svejcar, J, 2017: Failure Analysis of Corrugated Hoses. SOLID STATE PHENOMENA , doi: 10.4028/www.scientific.net/SSP.270.68
• Palenikova, L; Klakurkova, L; Gejdos, P; Remesova, M; Julis, M; Celko, L, 2017: Causal Analysis of Damage of a Cover. SOLID STATE PHENOMENA , doi: 10.4028/www.scientific.net/SSP.270.57
• Gejdos, P; Klakurkova, L; Julis, M; Horynova, M; Palenikova, L; Svejcar, J, 2017: Analysis of Damage of Solder Joint of Heat Exchanger. SOLID STATE PHENOMENA , doi: 10.4028/www.scientific.net/SSP.270.63
• Horynova, M; Remesova, M; Klakurkova, L; Julis, M; Gejdos, P; Palenikova, L, 2017: Evaluation of Surface Degradation of Deoxidized AW-AlMg0.7Si Alloy. SOLID STATE PHENOMENA , doi: 10.4028/www.scientific.net/SSP.270.136
• Komarov, P; Celko, L; Jech, D; Papula, M; Slamecka, K; Horynova, M; Klakurkova, L; Kaiser, J, 2017: Investigations of Wettability of Wear Resistant Coatings Produced by Atmospheric Plasma Spraying. SOLID STATE PHENOMENA , doi: 10.4028/www.scientific.net/SSP.270.230
• Horynova, M; Klakurkova, L; Svejcar, J; Julis, M; Gejdos, P; Celko, L, 2017: Failure analysis of casing of draft tube of turbine used in hydropower plant. ENGINEERING FAILURE ANALYSIS 82, p. 848 - 854, doi: 10.1016/j.engfailanal.2017.08.002

2016

• Jech, D; Celko, L; Klakurkova, L; Slamecka, K; Horynova, M; Svejcar, J, 2016: Formation of Thermally Sprayed Coatings on Grid-Like Structure Substrate. SOLID STATE PHENOMENA , doi: 10.4028/www.scientific.net/SSP.258.387
• Celko, L; Jech, D; Dvorak, K; Sulak, I; Klakurkova, L; Obrtlik, K, 2016: Durability of Amorphous and Crystalline BMAS Thermal Barrier Coatings Produced by Plasma Spraying. SOLID STATE PHENOMENA , doi: 10.4028/www.scientific.net/SSP.258.383
• Mouralova, K; Karpisek, Z; Kovar, J; Klakurkova, L, 2016: Freeman-Tukey Pseudoquasi-norm for Evaluating the Total Height of Profile Rt after WEDM. PROCEEDINGS OF THE 2016 17TH INTERNATIONAL CONFERENCE ON MECHATRONICS - MECHATRONIKA (ME) 2016 , p. 455 - 460
• Rocnakova, I; Montufar, EB; Horynova, M; Zikmund, T; Novotny, K; Klakurkova, L; Celko, L; Song, GL; Kaiser, J, 2016: Assessment of localized corrosion under simulated physiological conditions of magnesium samples with heterogeneous microstructure: Value of X-ray computed micro-tomography platform. CORROSION SCIENCE 104, p. 187 - 196, doi: 10.1016/j.corsci.2015.12.009
• Slamecka, K; Skalka, P; Jech, D; Klakurkova, L; Celko, L, 2016: CRITICAL LOCATIONS IN PLASMA SPRAYED THERMAL BARRIER COATINGS DUE TO IRREGULARITIES OF BOND COAT SURFACE. IRF2016: 5TH INTERNATIONAL CONFERENCE INTEGRITY-RELIABILITY-FAILURE , p. 1115 - 1116
• Mouralova, K; Matousek, R; Kovar, J; Mach, J; Klakurkova, L; Bednar, J, 2016: Analyzing the surface layer after WEDM depending on the parameters of a machine for the 16MnCr5 steel. MEASUREMENT 94, p. 771 - 779, doi: 10.1016/j.measurement.2016.09.028
  (LYRA)
• Montufar, EB; Horynova, M; Casas-Luna, M; Diaz-De-La-Torre, S; Celko, L; Klakurkova, L; Spotz, Z; Dieguez-Trejo, G; Fohlerova, Z; Dvorak, K; Zikmund, T; Kaiser, J, 2016: Spark Plasma Sintering of Load-Bearing Iron-Carbon Nanotube-Tricalcium Phosphate CerMets for Orthopaedic Applications. JOM 68(4), p. 1134 - 1142, doi: 10.1007/s11837-015-1806-9
  (LYRA, RIGAKU3)

2015

• Celko, L; Jech, D; Klakurkova, L; Slamecka, K; Kaiser, J, 2015: Princip fukce tepelných bariér připravovaných žárovými nástřiky. TRANSFER
• Svejcar, J; Klakurkova, L; Stransky, K; Spotz, Z; Celko, L, 2015: Assessment of the Causes of Indicated Defects in Forgings. KEY ENGINEERING MATERIALS , doi: 10.4028/www.scientific.net/KEM.647.205
• Jech, D; Klakurkova, L; Celko, L; Dolezal, P; Svejcar, J, 2015: Chain Segment Analysis.. KEY ENGINEERING MATERLIAS , doi: 10.4028/www.scientific.net/KEM.647.216
• Pavlouskova, Z; Klakurkova, L; Man, O; Celko, L; Svejcar, J, 2015: Assessment of the cause of cracking of hydraulic hose clamps. ENGINEERING FAILURE ANALYSIS 56, p. 14 - 19, doi: 10.1016/j.engfailanal.2015.05.014
• Klakurkova, L; Julis, M; Celko, L; Horynova, M; Hegr, E; Svejcar, J, 2015: Analysis of surface defects of aluminium components with hard anodized layers. ENGINEERING FAILURE ANALYSIS 56, p. 300 - 306, doi: 10.1016/j.engfailanal.2015.01.013
• Slamecla, K; Celko, L; Skalka, P; Pokluda, J; Nemec, K; Julis, M; Klakurkova, L; Svejcar, J, 2015: Bending fatigue failure of atmospheric-plasma-sprayed CoNiCrAlY plus YSZ CrossMark thermal barrier coatings. INTERNATIONAL JOURNAL OF FATIGUE 70, p. 186 - 195, doi: 10.1016/j.ijfatigue.2014.09.009

2014

• Klakurkova, L; Hegr, E; Celko, L; Podrabsky, T; Julis, M; Remesova, M; Svejcar, J, 2014: Comparative Analysis of Hard Anodized Layer on Aluminium Alloy. METALLOGRAPHY XV 782, p. 615 - 618, doi: 10.4028/www.scientific.net/MSF.782.615
• Jech, D; Celko, L; Julis, M; Klakurkova, L; Slamecka, K; Obrtlik, K; Svejcar, J, 2014: Critical Weak Points of Atmospheric Plasma Sprayed Thermal Barrier Coatings. METALLOGRAPHY XV 782, p. 567 - 572, doi: 10.4028/www.scientific.net/MSF.782.567
• Svejcar, J; Celko, L; Dvoracek, E; Klakurkova, L; Julis, M; Slamecka, K; Zapletal, J, 2014: Thermal Spray Technology and Casting in Renovation of Friction Bearings Surface. METALLOGRAPHY XV 782, p. 573 - 577, doi: 10.4028/www.scientific.net/MSF.782.573
• Celko, L; Klakurkova, L; Jech, D; Julis, M; Slamecka, K; Svejcar, J, 2014: Microstructure Development and Phlase Evolutin of Nickel Coated Aluminium and Hydronalium Substrates. METAL
• Jech, D; Celko, L; Chraska, T; Slamecka, K; Klakurkova, L; Dubsky, J; Svejcar, J, 2014: INFLUENCE OF ISOTHERMAL EXPOSURE ON MICROSTRUCTURAL CHANGES RESULTING IN DELAMINATION OF EUTECTIC Al2O3+ZrO2+SiO2 THERMAL BARRIER COATINGS. METAL 2014: 23RD INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS , p. 885 - 889
• Celko, L; de la Torre, SD; Klakurkova, L; Kaiser, J; Smetana, B; Slamecka, K; Zaludova, M; Svejcar, J, 2014: Temperature effect on the microstructural development of Al-Ni layered binary couples produced by an unconventional method. SURFACE & COATINGS TECHNOLOGY 258, p. 95 - 101, doi: 10.1016/j.surfcoat.2014.09.059
• Celko, L; Klakurkova, L; Slamecka, K; Smetana, B; Plocinski, T; Grzonka, J; Zaludova, M; Lewandowska, M; Svejcar, J, 2014: Effect of Heat Treatment on Formation of Al-Al3Ni Hypereutectic Alloys. MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE VII 592-593, p. 513 - 516, doi: 10.4028/www.scientific.net/KEM.592-593.513
• Celko, L; Klakurkova, L; Smetana, B; Slamecka, K; Zaludova, M; Hui, D; Svejcar, J, 2014: APPLICATION OF SACRIFICIAL COATINGS AND EFFECT OF COMPOSITION ON Al-Al3Ni ULTRAFINE EUTECTIC FORMATION. JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY 50(1), p. 31 - 36, doi: 10.2298/JMMB121013038C

2013

• Klakurkova, L; Celko, L; Slamecka, K; Julis, M; Hrckova, M; Svejcar, J, 2013: Formation and Morphology of Intermetallic Phases and Eutectic in Iron Coated Thick Aluminium Substrates. 15TH ANNUAL CONFERENCE YOUCOMAT 2013
• Pavloouskova, Z; Pacal, B; Stransky, K; Man, O; Klakurkova, L; Svejcar, J, 2013: Normalized Distribution Coeficient as a Novel Method for Cast Irons Matrix Heterogeneity Assessment. YUCOMAT
• Jech, D; Celko, L; Klakurkova, L; Hutarova, S; Julis, M; Svejcar, J, 2013: STRUCTURAL STABILITY OF PLASMA SPRAYED CONICRALY-ZrO2+Y2O3 THERMAL BARRIER COATINGS AFTER ISOTHERMAL EXPOSURE AT 1050 degrees C. METAL 2013: 22ND INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS , p. 1015 - 1020

2012

• Ricankova, V; Celko, L; Klakurkova, L; Svejcar, J, 2012: MIKROSTRUCTURAL CHANGES OF AIR PLASMA SPRAYED CONICRALY COATING AFTER REMELTING. 21ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2012) , p. 961 - 966
• Podrabsky, T; Celko, L; Klakurkova, l; Slamecka, K; Hutarova, S; Svejcar, J, 2012: Characterization of Slurry Aluminide Diffusion Coatins on Inconel 713LC. YUCOMAT
• Dolezal, P; Zapletal, J; Klakurkova, L; Celko, L; Podrabsky, T, 2012: Estabilishing of Optimum Forming Temterature on 100CrMo7-3 and 100CrMnSi6- 4 Bearing Steels under Partial Heating Conditions. YUCOMAT
• Celko, L; Klakurkova, L; Slamecka, K; Smetana, B; Zla, S; Zaludova, M, 2012: Formation of Hypereutectic Aluminium-based Alloys or Nickel Aluminides Using Sacrificial Nickel Coatings. YUCOMAT 2012
• Klakurkova, L; Celko, L; Slamecka, K; Dvoracek, E; Podrabsky, T; Svejcar, J, 2012: The Role of Technological Input Parameters on a Quality of Plasma Sprayed Thermal Barrier Coatings. YUCOMAT
• Celko, L; Klakurkova, L; Slamecka, K; Pospisilova, S; Julis, M; Nemec, K; Podrabsky, T; Svejcar, J, 2012: STRUCTURAL STABILITY OF THERMAL BARRIER COATINGS PRODUCED BY THERMAL SPRAYING. 21ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2012) , p. 998 - 1004

2011

• Celko, L; Ricankova, V; Klakurkova, L; Podrabsky, T; Dvoracek, E; Svejcar, J, 2011: Changes in Microstructure of Air Plasma Sprayed M-CrAlY Coatings After Short Thermal Exposure in Argon Atmosphere. ACTA PHYSICA POLONICA A 120(2), p. 336 - 339
• Klakurkova, L; Celko, L; Slamecka, K; Dolezal, P; Svejcar, J, 2011: INFLUENCE OF TEMPERATURE ON MICROHARDNESS OF ALUMINIUM-BASED COMPOSITES PRODUCED BY CONTROLLED HYPEREUTECTIC REACTION IN Al-Ni BINARY SYSTEM. CHEMICKE LISTY 105, p. S820 - S821

2010

• CELKO, L., KLAKURKOVA, L., SVEJCAR, J., 2010: Diffusion in Al-Ni and Al- NiCr Interfaces at Moderate Temperatures. DEFECT AND DIFFUSION FORUM 297-301, p. 771 - 777

2009

• CELKO, L., KLAKURKOVA, L., MAN, O., SVEJCAR, J., 2009: Use of powder liquid method of aluminide diffusion coatings formation on inconel 713 LC nickel-based superalloy. MATERIALS AND MANUFACTURING PROCESSES 24(10-11), p. 1155 - 1161

• Technologie kombinovaného zdroje plasmatu pro vznik pokročilých povrchových úprav (FV10477), Ministerstvo průmyslu a obchodu ČR, 2016 - 2019
• Research of corrosion resistance of the metal materials at hydroelectric power station. (SR6280006901), , 2018 - 2018
• CEITEC - Central European Institute of Technology (CZ.1.05/1.1.00/02.0068), Ministerstvo školství, mládeže a tělovýchovy ČR, 2011 - 2015
• CEITEC - Central European Institute of Technology (CZ.1.05/1.1.00/02.0068), Ministerstvo školství, mládeže a tělovýchovy ČR, 2011 - 2015
• Development of an interaction chamber for Laser-Induced Breakdown Spectrocopy (LIBS) (TA02011272), Technology Agency of the Czech Rep. - ALFA, 2012 - 2014
• Development of an interaction chamber for Laser-Induced Breakdown Spectrocopy (LIBS) (TA02011272), Technology Agency of the Czech Rep. - ALFA, 2012 - 2014
• Utilization of the Laser Induced Plasma Spectroscopy (LIBS) for spectrochemical analysis of plant samples with high spatial resolution (ME09015), MEYS - KONTAKT, 2009 - 2012
• Development of calibration-free quantitative laser-induced breakdown spectroscopy (LIBS) (ME10061), MEYS - KONTAKT, 2010 - 2012
• Utilization of the Laser Induced Plasma Spectroscopy (LIBS) for spectrochemical analysis of plant samples with high spatial resolution (ME09015), MEYS - KONTAKT, 2009 - 2012
• Development of calibration-free quantitative laser-induced breakdown spectroscopy (LIBS) (ME10061), MEYS - KONTAKT, 2010 - 2012
• OD62200008; Identifying the presence and depth intergranular corrosion (OD62200008), , 2012 - 2012
• Development and application of capillary-discharge based short wavelength radiation sources (OC09013), MEYS - COST CZ, 2009 - 2011
• Development and application of capillary-discharge based short wavelength radiation sources (OC09013), MEYS - COST CZ, 2009 - 2011