Glass-graphite micro electrodes as potential type of working electrodes for cyclic voltammetry applications
(CEITEC VUT/FEKT-J-25-8892),
VUT v Brně,
, 2025 - 2026
Structural, Electrical, Magnetic Properties of Nd-Bismuth Ferrite/Eu-Barium Titanate Nanocomposite and its Applications
(CEITEC VUT/FEKT-J-25-8865),
VUT v Brně,
, 2025 - 2026
ENHANCING REFLECTIVE HOLOGRAPHIC MICROSCOPY TECHNIQUE FOR REAL-TIME CELL MASS ANALYSIS ON BULK CERAMIC SUBSTRATES
(CEITEC VUT-J-25-8907),
VUT v Brně,
, 2025 - 2026
Study of Microporosity Formation Around Reinforcing Alumina in 3D Printed Hydroxyapatite Scaffolds
(CEITEC VUT-J-25-8812),
VUT v Brně,
, 2025 - 2026
Nanoporous and microporous structures for bone tissue engineering
(LUC23069),
Ministry of Education, Youth and Sports,
, 2023 - 2025
Improvement of mechanical properties of 3D printed hydroxyapatite-based scaffolds
(CEITEC VUT-J-24-8646),
VUT v Brně,
, 2024 - 2025
Utilization of Reflective Holographic Microscopy Technique for Cell Mass Analysis on Bulk Ceramic Substrates
(CEITEC VUT-J-24-8650),
VUT v Brně,
, 2024 - 2025
Applying graphite nanolayer coating to enhance field emission current flow from tungsten cathodes
(CEITEC VUT/FEKT-J-23-8307),
VUT v Brně,
, 2023 - 2024
Bioartificial 3D graft for intervertebral spinal fusion
(NU-20-08-00402),
Ministerstvo zdravotnictví ČR,
, 2020 - 2023
New multi-component aerogels for environmental catalysis
(LTC20019),
Ministerstvo školství, mládeže a tělovýchovy ČR,
, 2020 - 2023
Development of functional ceramic and glass ceramic materials in collaboration with the Centre of Excellence FunGlass
(LTT18013),
Ministerstvo školství, mládeže a tělovýchovy ČR,
, 2018 - 2022
Printed flexible electro-photocatalytic system based on organosilicate binders for removal of organic pollutants
(TH03030197),
Technologická agentura ČR, Technology Agency of the Czech Republic,
, 2018 - 2021
Effects of donor groups of Organic Acids as chelating agents during synthesis of TiO2 Xerogels and over hydrogen production.
(CEITEC VUT-J-20-6497),
VUT v Brně,
, 2020 - 2021
Flexible ceramic substrates with optimized electric properties
(18-05478S),
Grantová agentura České republiky,
, 2018 - 2020
Comprehensive pre-clinical evaluation of lateral lumbar spine fusion with hybrid biodegradable nanocomposite porous implant.
(17-31276A),
Ministry of Health of the Czech Republic,
, 2017 - 2020
Control of microstructure and properties of lead-free piezoceramic materials through advanced ceramic processing
(18-20498S),
Grantová agentura České republiky,
, 2018 - 2020
Centre of advanced materials and technologies for protection and safety enhancement
(TE02000162),
Technologická agentura ČR, Technology Agency of the Czech Republic,
, 2014 - 2019
Zářením stimulované reakce a přenos hmoty keramických materiálů
,
Ministerstvo školství, mládeže a tělovýchovy ČR,
, 2017 - 2018
Using theoretical and experimental approaches to sintering to obtain optimal microstructure and properties of advanced ceramic materials
(GA15-06390S),
Czech Science Foundation - Standard Grants,
, 2015 - 2017
Utilization of theoretical and experimental approaches to sintering for tailoring the microstructure and properties of advanced ceramic materials
(GA15-06390S),
Grantová agentura České republiky,
, 2015 - 2017
Structurally and functionally graded biocomposites and scaffold based on Ca-phosphates for bone tissue engineering
(LD14072),
Ministerstvo školství, mládeže a tělovýchovy ČR,
, 2014 - 2017
Natural inorganic polymers and smart functionalized micro-units applied in customized rapid prototyping of bioactive scaffolds
(7E13031),
Ministry of Education, Youth and Sports,
, 2014 - 2016
Research of bentonite under shearing stress.
(HS6265706300),
,
, 2016 - 2016
Prototype of energy harvester for wearable applications
(HS6255707700),
,
, 2015 - 2016
MILEPEDE
(3SGA5630),
Evropská unie,
, 2013 - 2016
Research of the bentonite powder characteristic
(HS6265703000),
,
, 2016 - 2016
Effect of electro-magnetic field on sintering of advanced ceramic materials
(GP13-08717P),
Grantová agentura České republiky,
, 2013 - 2016
Development of transparent polycrystalline ceramics for ballistic and high-temperature applications
(GA13-09310S),
Grantová agentura ČR, Czech Science Foundation,
, 2013 - 2016
Pressure-less sintering of crack-free advanced ceramics by extremely fast heating
(GA13-02476S),
Grantová agentura ČR, Czech Science Foundation,
, 2013 - 2015
A fundamental study of the effect of synthesis and processing conditions on the structure and properties of (Ba,Ca)(Ti,Zr)03 lead-free piezoceramics.
(GA13-09967S),
Grantová agentura České republiky,
, 2013 - 2015
Study of Catalytically Active Nanoparticles and Nanostructures for the Syntesis of Hydrogen
(LD12004),
Ministerstvo školství, mládeže a tělovýchovy ČR,
, 2011 - 2015
Study of catalytically active nanoparticles and nanostructures for the synthesis of hydrogen
(LD12004),
Ministry of Industry and Trade - TANDEM,
, 2012 - 2015
Rozvoj kooperačnej a vzdelavacej platformy pre zvyšovanie cezhraničnej konkurenceschopnosti v oblasti využitia plazmových aplikací pre sklokeramické technologie
(OPSRCR/2014/04),
Ministry of Education, Youth and Sports,
, 2014 - 2014
Support of the development of high-quality teams in R&D in the field of material science
(CZ.1.07/2.3.00/20.0029),
MEYS - OP Education for Competiteveness,
, 2011 - 2014
Research4Industry - Budování a rozvoj vědecko-výzkumné spolupráce s výzkumnými a průmyslovými partnery
(CZ.1.07/2.4.00/17.0006),
Ministerstvo školství, mládeže a tělovýchovy ČR,
, 2011 - 2014
Processing and properties of ferroics and multiferroics
(LD11035),
Ministry of Education, Youth and Sports,
, 2011 - 2013
Processing and properties of ferroics and multiferroics
(LD11035),
MEYS - COST CZ,
, 2011 - 2013
Rheological behaviour of polymer melts and solutions loaded with nanoparticle fillers
(OC09040),
MEYS - COST CZ,
, 2009 - 2011
Natural inorganic polymers and smart functionalized micro-units applied in customized rapid prototyping of bioactive scaffolds
(NMP3-SL-2013-604036),
European Union,
, 2013
